Do you know these three tips for using stepper motors?

Maintaining the best performance of stepper motors for your application is the best way to protect your interests. If you want your stepper motor to maintain the best performance, the most basic requirement is to ensure that the motor purchased is suitable for the application, the motor quality is reliable. Secondly, you also need to pay attention to optimizing the use of the motor, which requires you to have some knowledge of how to use it. Here is a list of three tips to see if you know them.

1. Stepper motors should not work in vibrating areas, otherwise the smooth running of the motor will be affected by vibration, which is not only detrimental to the dominant function of the motor, but will also cause some damage to the motor, which is not conducive to the long-term use of the motor. If it must be used in a vibrating area, you can reduce the damage to the motor by changing the voltage, current or adding some damping.
2. Stepper motors operating below 90 rpm should be driven with low current, high inductance and low voltage.
3. In the application of stepper motors, attention should be paid to the principle of selecting the motor first and then the drive. On the basis of choosing the right type of motor according to the actual requirements, choose the corresponding suitable drive to ensure that the drive meets the requirements for use and to promote the optimum operation of the motor.

Conclusion

The above three points can help your motor to maintain a good state, but if you want your motor to always maintain a good working state, it is not enough to just know these, you also need to understand the correct use of the motor and regular maintenance, so as to increase its lifetime, so that your motor as good as possible to keep.